[. . . ] Water connection • Make sure not to cause damage to the water hoses. €¢ Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. €¢ The first time you use the appliance, make sure that there is no leakage. €¢ The water inlet hose has a safety valve and a sheath with an inner mains cable. [. . . ] 4) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. This prevents the remaining food to bond on the dishes and bad odours to come out from the appliance. 2 11 - 12 4 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. Information for test institutes For all the necessary information for test performance. OPTIONS Activate or deactivate the options before the start of a programme. You cannot activate or deactivate the options while a programme operates. If one or more options are set, make sure that the related indicators are on before the programme starts. Start the shortest programme with a rinsing phase, without detergent and without dishes. 2 Energy Saver This option decreases the temperature in the last rinse phase. The use of this option decreases the energy consumption (up to 25%) and the programme duration. €¢ If the option is not applicable to the programme, the related indicator flashes quickly 3 times and then goes off. Opening the door while the appliance operates If you open the door, the appliance stops. When you close the door, the appliance continues from the point of interruption. Cancelling the delay start while the countdown operates When you cancel the delay start, also the programme is cancelled. All the programme indicators come on and the display shows 2 horizontal status bars. All the programme indicators come on and the display shows 2 horizontal status bars. Make sure that there is detergent in the detergent dispenser before you start a new programme. If you do not press the on/off button, the AUTO OFF function automatically deactivates the appliance a few minutes after the end of the programme. This helps to decrease the energy consumption, Important • Let the dishes become cold before you remove them from the appliance. €¢ First remove the items from the lower basket, then from the upper basket. €¢ There can be water on the sides and on the door of the appliance. 1 The water softener Hard water contains a high quantity of minerals that can cause damage to the appliance and bad washing results. [. . . ] Make sure that the appliance is in setting mode, refer to ‘Setting and starting a programme’. Press and hold, at the same time, butand button until the indicaton tors of programmes , and 10. 1 If the washing and drying results are not satisfactory Whitish streaks or bluish layers on glasses and dishes • The released quantity of rinse aid is too much. Stains and dry water drops on glasses and dishes • The released quantity of rinse aid is not sufficient. [. . . ]